Konig Electronic Digital video recorder with built-in 1 TB hard disk - Manual (Page 26)

ENGLISH
26
Picture 5-34
When selecting 3G from the Type. Details please
follow below steps:
1. Input Mobile Port
(China Telecom:#777;Others: *99#)
2. Click <Apply>. System will automatically
capture IP.
3. Enter IP address:web port to visit DVR remotely.
Under the above four net mode, you can visit your remote DVR via DDNS and apply for free
DDNS account from the websites: www.3322.org or www.dyndns.org.
5�2�4�2 Mobile Set
The DVR is currently compatible with mobile phones running Andriod, Windows Mobile,
Symbian operating systems, Iphone and Black berry on 3G networks.
Please follow below steps:
1. Configure network parameters, details please refer to section 5.2.4.1;
2. Configure mobile port no (such as 19011); and the port need forward to router. Details
please refer to section 5.2.4.3;
3. Save the parameters and exit Main Menu;
4. System auto restart;
5. User name and password of mobile is consistent with DVR.
5�2�4�3 Router’s Port Forwarding
Port forwarding is required when you want to access the DVR connected to the router from
outside of the router’s network. If PPPoE is selected, port forwarding is not required.
1. Input router’s IP address from IE-based browser to open the Router configuration interface
shown as Picture 5-35;
2. Click [Transmittal rule] option to take you to the port forwarding instructions for your
router;
3. The DVR IP address for the intranet should be <192.168.1.101>, you should forward Media
port (19009) and HTTP port (19010) to this IP address respectively;
4. Now user can visit the DVR remotely.