Konig Electronic Digital video recorder with built-in 1 TB hard disk - Manual (Page 44)

ENGLISH
44
6�3�3�2 Record
Click <Record> option to unfold its sub-options: Record parameter, Schedule and Main stream.
Picture 6-15 Picture 6-16
Picture 6-17
1. Record Parameters: Under [Record parameters]
option, allow you set channel, record enable, pack
time and Pre-record status shown as Picture 6-15;
2. Schedule: Detailed parameters please refer to
DVR local setting (shown as Picture 6-16).
Green stand for Normal record; Yellow stands for
Motion detection; Red stands for I/O triggered
record.
3. Main Stream: detailed settings please refer to
DVR local setting (shown as Picture 6-17). Herein
allow user modifies the resolution, frame rate, Bit
rate and audio of the record channel.
6�3�3�3 Network Parameters
Unfold <Network> option to enter into its sub-options: Network, sub stream, Email, mobile
and DDNS configuration.
1. Network
Picture 6-18
The model support three network type, including
Static, DHCP and PPPoE. System default <Static> as
its network type. User could allocate IP and perform
Port forwarding for DVR according to different router.
When set <UPNP> to “On”, user no needs to perform
port forwarding. Once you modify the network
parameters successfully, will automatically restart.
DVR
For details parameters please refer to Picture 6-18,
Picture 6-19 and Picture 6-20.