Lingenfelter L250280197 Lingenfelter C5 Corvette E-Force Supercharger Install Kit v2.9 - Manual (Page 28)

Page 27
72. Using a 10mm socket, remove the six
bolts holding the water pump onto the engine
block. Remove the OEM water pump.
NOTE: Be sure to save the three (3) driver-side
bolts as they will be used for the new water pump
installation (step 128).
73. Remove the power steering reservoir
cap. Use a hand syphon to drain all of the fluid
out of the power steering reservoir. Discard the
fluid and replace the reservoir cap.
CAUTION: Be very careful to not allow any dirt
into the system.
74. Use a pair of pliers to remove the clamp
attaching the outlet hose to the power steering
reservoir. Remove the power steering reservoir
by pulling up and away from the hose and
bracket.
75. Using a 15mm socket and ratchet, remove
the two (2) bolts holding the reservoir bracket
onto the engine block.