Lingenfelter L250280197 Lingenfelter C5 Corvette E-Force Supercharger Install Kit v2.9 - Manual (Page 71)

Page 70
242. Install the supplied short EVAP hose with
the 90 degree quick connect fitting on both ends.
One end of the fitting will attach to the outside
fitting of the EVAP solenoid. Route the hose
under the tensioner bracket and connect to the
fitting pointing down on the inlet housing.
243. Connect the supplied long hose with
straight quick connect fittings on both ends. One
end connects to the inside fitting of the EVAP
solenoid. Route the hose under the supercharger
and back to the fitting located on the driver-side
of the firewall.
244. Install the supplied long hose with one
straight connector. The connector goes on the
fitting under the throttle body while the other end
of the hose connects to the PCV valve located on
the driver-side valve cover.
245. Using a 15mm socket and the factory
bolts, re-install the alternator. Torque bolts to 35
ft-lbs.