Lingenfelter L250280197 Lingenfelter C5 Corvette E-Force Supercharger Install Kit v2.9 - Manual (Page 43)

Page 42
131. Using the two (2) stock tensioner bolts
and the supplied socket head cap screw, install
the new tensioner bracket with an 8mm Allen
socket and a 15mm socket. The stock tensioner
bolts are denoted by red arrows and the socket
head cap screw position is denoted with a yellow
arrow. Torque the bolts to 37 ft-lbs.
132. Using blue Loctite® and a 12mm socket,
install the idler on to the tensioner bracket using
a M8-1.25 X 20mm bolt (PN: 44454) supplied in
the LPE kit. Torque the bolt to 18 ft-lbs.
133. Using a 15mm socket, tighten the
Edelbrock-supplied bolt to install the new
tensioner. Torque the bolt to 37 ft-lbs.
134. Connect the upper radiator hose and
re-install the OEM clamps using spring-loaded
clamp pliers.