Luxul XBR-4400 - Manual (Page 10)

10
XBR-4400
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-4400 Vers: 07314
automatically pull the WAN IP, WAN Subnet Mask, WAN Gateway, WAN Primary DNS
and WAN Secondary DNS from your ISP’s Modem once the Router is successfully
Authenticated.
Select the Menu Quick Setup and Connection Type PPPOE from the dropdown to
view the following page:
„
Internet/WAN: Displays the WAN connection Options
w
Connection Type: Select the desired WAN Connection Type. When set to PPPOE
you must enter a Username and Password that your ISP provides to authenticate
your Router allowing it to connect. The Router will pull all connection information
automatically from the ISP’s Modem once it is successfully authenticated. DHCP is
the default setting.
w
Username: Allows you to enter the PPPOE Username specified by your ISP.
w
Password: Allows you to enter the PPPOE Password specified by your ISP.
w
Max Failed Pings: Allows you to specify the Maximum number of Failed Pings to
the PPPOE Server before the Router attempts to re-authenticate to the PPOE Sever.
We recommend the default value of 3 attempts unless your ISP recommends a
different value.
w
Ping Interval: Allows you to specify the number of seconds to wait between Ping
attempts to the PPPOE Server. We recommend the default value of 5 seconds in
order to preserve WAN resources.
w
Primary DNS: Allows you to select the checkbox and manually configure a Primary
DNS Server IP Address. “DNS Assigned By ISP” is the default setting.
w
Secondary DNS: Allows you to select the checkbox and manually configure a
Secondary DNS Server IP Address. “DNS Assigned By ISP” is the default setting.