Luxul XBR-4400 - Manual (Page 8)

8
XBR-4400
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-4400 Vers: 07314
2.5 Default IP Address
The XBR-4400 default IP address is 192.168.0.1. This address can be changed. However, for
hassle free installation of other plug and play Luxul devices, it is recommended that the
default IP value be maintained.
2.6 Connecting a Client Device
Connect the client device to one of the XBR-4400 LAN ports or to a switch that is
connected to an XBR-4400 LAN port. The DHCP server on the XBR-4400 is configured
by default. If your client device is set to obtain an address automatically, no further
configuration is required.
2.7 Verifying Connectivity
After automatic configuration of the TCP/IP parameters, the ping command can be used
to check connectivity between the XBR-4400 and the client device.
Windows Devices:
1. Select Start >> Run input cmd in the Run line then press enter.
2. At the newly opened command interface enter the following command: ping
192.168.0.1 and press enter. If connected properly, the system should report back a result
as follows: packets sent=4, packets received=4, packets lost=0. This means the device is
connected with a valid IP address.
3 CONFIGURATION
This chapter introduces the configuration of the XBR-4400 Enterprise Multi-WAN
Router functions via the Web-based management interface.
„
Quick Setup
„
Status
„
Network
„
Firewall/Security
„
QoS
„
VPN
„
Administration
„
Tools
3.1 Quick Setup
The Quick Setup page allows you to configure the Primary Internet / WAN connec-
tion settings and the Local Network / LAN settings. This page is intended to get your