Luxul XBR-4400 - Manual (Page 24)

24
XBR-4400
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-4400 Vers: 07314
NOTE: After making any changes to VLANs you must click the Save button
to Save your changes, then you must click the Reboot button for the
changes to take effect. You can click the Save button and proceed to
other pages without losing your configured changes.
NOTE: If VLANs are configured incorrectly it may be required to Reset the
Router to Default Settings. Please back up any configuration before
attempting to Enable VLANs.
NOTE: Inter VLAN Routing will separate Broadcast Domains and allow
devices to still access eachother via IP Address. However, it will
also block any Layer 2 discovery protocols such as; WINS Windows
Internet Naming Service, and Bonjour.
NOTE: The VLAN Subnet must be different than the LAN Subnet already
configured on the Router. If the same Subnet is used it will result in
Network failure.
3.3.6 Routing
This page displays the Routing Table of the Router.
Select the menu Network>>Routing to display the following page.
„
Active Routes: Displays the current Active Routes on the Router.
w
Destination IP: Displays the Destination IP Address or IP Range of the Route.
w
Subnet Mask: Displays the Subnet Mask of the Destination IP.