Luxul XBR-4400 - Manual (Page 30)

30
XBR-4400
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-4400 Vers: 07314
„
QoS Setup: Displays the QoS settings currently running on the Router.
w
QoS Service: Allows you to Enable or Disable the QoS service on the Router.
Disabled is the default setting.
w
Calculated Overhead: Allows you to Enable or Disable the Calculated Overhead
function in QoS. Disabled is the default setting. Calculated Overhead is used by
the Router to manage fluctuating bandwidth supplied by the Internet connection.
This function keeps the Router from overrunning the available bandwidth.
w
Download Speed: Allows you to specify the Download Speed in Megabits per
second allowed in the QoS Rules. 5Mbps is the default setting.
w
Upload Speed: Allows you to specify the Upload Speed in Megabits per second
allowed in the QoS Rules. 2Mbps is the default setting.
w
Save: This button is used to Save the configuration changes made on this page.
Once you have clicked Save you may move to other pages in the Router setup.
Most changes will require a Reboot to allow the changes to take effect.
w
Reboot: This button is used to Reboot the Router after making configuration
changes or can be used to Reboot the Router for any reason.
„
QoS Rules: Allows you to configure QoS Rules.
w
Service Level: Allows you to specify the QoS Service Level used for this Rule.
Normal is the default setting.
w
Source Host: Allows you to specify by IP Address which Host(s) this Rule will apply
to. All is the default setting. All will apply this Rule to all packets transmitted to the
WAN Port of the Router.