Luxul XBR-4400 - Manual (Page 11)

11
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
w
Custom MAC Address: Allows you to set a Custom MAC Address which allows the
Router to appear as a Computer to the ISP Modem. (Some Modems will cache the
MAC Address of the first device used to setup Internet Service and cannot be reset
by the user. If this occurs you can clone that setup Device’s MAC Address to allow
the XBR-4400 to connect to the Modem.)
w
Custom MTU: Allows you to configure a Custom MTU setting. MTU or Maximum
Transmission Unit, is the maximum packet size allowed on the network. Some ISPs
(usually DSL or Fiber) will require this value to be set if the Modem is in a Bridge
mode.
NOTE: After making any changes to the Connection Type you must click the
Save button to Save your changes, then you must click the Reboot
button for the changes to take effect. You can click the Save button
and proceed to other pages without losing your configured changes.
3.1.3 Connection Type Static IP
This Connection Type option requires the Static IP, Netmask, Gateway, Primary DNS and
Secondary DNS provided by your ISP to be entered manually. This type will never have
an IP Address change on the connection and is typically used in Business or Remote
Access implementations.
Select the Menu Quick Setup and Connection Type Static IP from the dropdown to
view the following page:
„
Internet/WAN: Displays the WAN connection Options
w
Connection Type: Select the desired WAN Connection Type. When set to Static
IP you must enter the IP information that your ISP provides this allows your Router
to connect.