Luxul XBR-4400 - Manual (Page 28)

28
XBR-4400
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-4400 Vers: 07314
„
UPnP Configuration: Displays the currently UPnP (Universal Plug and Play) configura-
tion of the Router.
w
UPnP: Allows you to Enable or Disable UPnP on the Router. Enabled is the default
setting.
„
Available Networks: Displays which VLANs on the Router have UPnP Enabled.
w
Default: Allows you to enable UPnP for the currently configured VLANs on the
Router. Default: is the Management VLAN configured by default on the Router,
simply check the checkbox next to the desired VLANs to Enable UPnP for the
selected VLANs.
w
Save: This button is used to Save the configuration changes made on this page.
Once you have clicked Save you may move to other pages in the Router setup.
Most changes will require a Reboot to allow the changes to take effect.
w
Reboot: This button is used to Reboot the Router after making configuration
changes or can be used to Reboot the Router for any reason.
w
Cancel: This button Cancels any changes made on this page.
„
Current UPnP Leases: Displays the current UPnP (Universal Plug and Play) Port Leases
active on the Router.
w
WAN Port: Displays the WAN Port opened by the UPnP Device Lease.
w
LAN IP: Displays the Local Network IP Address of the UPnP Device that requested
the Lease.
w
LAN Port: Displays the LAN Port used by the UPnP Device.
w
Protocol: Displays the Protocol (TCP/UDP/Both) set by the UPnP Device.