Draytek 2130 - Manual (Page 132)

Vigor2130 Series User’s Guide 124
Request/Reply Choose the request or replay that you want to filter.
Sender IP Filter Specify the sender IP filter for this ACE.
Choose Any to filter all of the packets.
Choose Host to filter the packets from the host with the
address typed in Sender IP Address filed.
Choose Network to filter the packets within the network
defined in Sender IP Address and Sender IP Mask
fields.
Sender IP Address Type the Sender IP Address here. This option is available
when you choose Host or Network as Sender IP Filter.
Sender IP Mask Type the Sender IP Mask here. This option is available
only when you choose Network as Sender IP Filter.
Target IP Filter Specify the target IP filter for this specific ACE.
Choose Any to filter all of the packets.
Choose Host to filter the packets from the host with the
address typed in Target IP Address filed.
Choose Network to filter the packets within the network
defined in Target IP Address and Target IP Mask fields.
Target IP Address Type the Target IP Address here. This option is available
when you choose Host or Network as Target IP Filter.
Target IP Mask Type the Target IP Mask here. This option is available
only when you choose Network as Target IP Filter.
ARP SMAC Match Specify whether frames/packets can meet the action
according to the sender hardware address field (SHA)
settings.
0: means sender hardware address is not equal to the
SMAC address.
1: means sender hardware address is equal to the SMAC
address.
Any: means any value is allowed.
RARP DMAC Match Specify whether frames can hit the action according to
their target hardware address field (THA) settings.