Draytek 2130 - Manual (Page 138)

Vigor2130 Series User’s Guide 130
Source Port Filter Specify the UDP port source filter for this ACE.
Any: No UDP source filter is specified.
Specific: If you want to filter a specific UDP source filter
with this ACE, you can enter a specific UDP source value.
A field for entering a UDP source value appears.
Range: If you want to filter a specific UDP source range
filter with this ACE, you can enter a specific UDP source
range value. A field for entering a UDP source port range
appears.
Source Port No. Type the value if you choose Specific as the Source Port
Filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this UDP source value.
Source Port Range Type the value if you choose Range as the Source Port
Filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this UDP source value.
Dest. Port Filter Specify the UDP port destination filter for this ACE.
Any: No UDP destination filter is specified.
Specific: If you want to filter a specific UDP destination
filter with this ACE, you can enter a specific UDP
destination value. A field for entering a UDP destination
value appears.
Range: If you want to filter a specific UDP destination
range filter with this ACE, you can enter a specific UDP
destination range value. A field for entering a UDP
destination port range appears.
Dest. Port No. Type the value if you choose Specific as the Dest. Port
Filter. The allowed range is 0 to 65535. A frame meeting
this ACE matches this UDP source value.
Dest. Port Range Type the value if you choose Range as the Dest. Port Filter.
The allowed range is 0 to 65535. A frame meeting this
ACE matches this UDP source value.
z Choose IPv4 as the Frame Type. You will see IP Parameters on the bottom of the page.
If you choose TCP as IP Protocol Filter, you will get the page as the following: