Draytek 2130 User Manual
Page 43
Vigor2130 Series User’s Guide
35
D
D
H
H
C
C
P
P
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet.
If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for
your router automatically. It is not necessary for you to assign any setting,
Router Name
Type in a name for the router. It must be the same as the name
used in Syslog.
Clone MAC Address
It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click OK to activate them.
P
P
P
P
P
P
o
o
E
E
To choose PPPoE as the accessing protocol of the internet, please select PPPoE from the
Internet Access menu. The following web page will be shown.
Username
Type in the username provided by ISP in this field.