Draytek 2130 User Manual
Page 60
Advertising
Vigor2130 Series User’s Guide
52
Name
Specify the name for the defined network service.
Protocol
Specify the transport layer protocol. It could be TCP, UDP and
TCP+UDP.
Start Port
Specify the starting port number of the service offered by the
local host.
End Port (optional)
Specify the ending port number of the service offered by the
local host.
Local Host
Enter the private IP address of the local host.
Local Port (optional)
If it is configured, the forwarded traffic is mapped to this port
on the local host.
Advertising