Draytek 2130 User Manual
Page 195
Vigor2130 Series User’s Guide
187
Rx Unicast
Display the counting number of the received unicast
packet.
Rx Broadcast
Display the counting number of the received broadcast
packet.
Rx Pause
Display the counting number of the received pause packet.
RX 64 Bytes
Display the number of 64-byte frames in good and bad
packets received.
RX 65-127 Bytes
Display the number of 65 ~ 127-byte frames in good and
bad packets received.
RX 128-255 Bytes
Display the number of 128 ~ 255-byte frames in good and
bad packets received.
RX 256-511 Bytes
Display the number of 256 ~ 511-byte frames in good and
bad packets received.
RX 512-1023 Bytes
Display the number of 512 ~ 1023-byte frames in good and
bad packets received.
RX 1024- 1526 Bytes
Display the number of 1024-1522-byte frames in good and
bad packets received.
RX 1527 Bytes
Display the number of 1527-byte frames in good and bad
packets received.
Rx Low
Display the low queue counter of the packet received.
Rx Normal
Display the normal queue counter of the packet received.
Rx Medium
Display the medium queue counter of the packet received.
Rx High
Display the high queue counter of the packet received.
Rx Drops
Display the number of frames dropped due to the lack of
receiving buffer.
Rx CRC/Alignment
Display the number of Alignment errors packets received.
Rx Undersize
Display the number of short frames (<64 Bytes) with valid
CRC.
Rx Oversize
Display the number of long frames (according to
max_length register) with valid CRC.
Rx Fragments
Display the number of short frames (< 64 bytes) with
invalid CRC.
Rx Jabber
Display the number of long frames (according
tomax_length register) with invalid CRC.
Rx Filtered
Display the filtered number of the packet received.
Tx Packets
Display the counting number of the packet transmitted.
Tx Octets
Display the total transmitted bytes.
Tx Unicast
Display the show the counting number of the transmitted
unicast packet.
Tx Multicast
Display the show the counting number of the transmitted
multicast packet.
Tx Broadcast
Display the counting number of the transmitted broadcast
packet.