Draytek 2130 - Manual (Page 142)

Vigor2130 Series User’s Guide 134
match this entry.
Any: Any value is allowed.
TCP PSH Specify the TCP "Push Function" (PSH) value for this
ACE.
0: TCP frames where the PSH field is set must not be able
to match this entry.
1: TCP frames where the PSH field is set must be able to
match this entry.
Any: Any value is allowed.
TCP ACK Specify the TCP "Acknowledgment field significant"
(ACK) value for this ACE.
0: TCP frames where the ACK field is set must not be able
to match this entry.
1: TCP frames where the ACK field is set must be able to
match this entry.
Any: Any value is allowed
TCP URG Specify the TCP "Urgent Pointer field significant" (URG)
value for this ACE.
0: TCP frames where the URG field is set must not be able
to match this entry.
1: TCP frames where the URG field is set must be able to
match this entry.
Any: Any value is allowed.
z Choose IPv4 as the Frame Type. You will see IP Parameters on the bottom of the page.
If you choose Other as IP Protocol Filter, you will get the page as the following: