Setting up postage by phone® meter payment system, Phone/network set up: pbp account, Phone/network set up: dialing prefix – Pitney Bowes DM900 User Manual
Page 82: Phone/network set up: pb phone
5 • Mailing System Setup
5-14
SV60861 Rev. F
Setting Up
Postage By
Phone®
Meter
Payment
System
This section describes how to set up Post-
age By Phone® Meter Payment System on
your mailing system. It also includes
advanced phone setup instructions for
modifying individual phone connection
parameters (user ID and password and
server IP address).
To access the Postage By Phone® System
setup options, press the
Menu key on the
IntelliLink® Control Center, select
Set Up
from the main screen, and then select
Phone/Network Set Up.
All of the possible options are listed on the menu at the right.
Phone/Network
Set Up: PBP
Account #
Your Pitney Bowes representative uses this to set up your Postage By
Phone
®
Meter Payment System account when installing your mailing sys-
tem. Your account number is supplied by Pitney Bowes when you order
your system.
Do not change this unless you are directed to do so by Pitney Bowes.
Phone/Network
Set Up: Dialing
Prefix
If you need to dial a number in order to reach an outside line, use this
option to enter that prefix number.
1. Press the
Menu key on the control center. Select Set Up from the main
screen, then select
Phone/Network Set Up.
2. Select
Dialing Prefix.
3. Use the numeric keypad to enter the number you need to dial to reach
an outside line, for example, 9.
To enter a symbol hold down the
Symbol key and at the same time
press the key for the symbol (for example, the # or * keys).
4. Press the
Enter key.
Phone/Network
Set Up: PB
Phone #
Use this option to enter the Pitney Bowes phone number that you use to
add postage to your postage meter.
1. Press the
Menu key on the control center. Select Set Up from the main
screen, then select
Phone/Network Set Up.
2. Select
PB Phone #. This number is supplied by your Pitney Bowes rep-
resentative.
3. Use the numeric keypad to enter the phone number you need to dial to
connect to Pitney Bowes to add postage, or select
Reset to Factory
Phone Number to change back to the number present when the sys-
tem was delivered.
4. Press the
Enter key.
9
Phone/Network Set Up
PBP Account #
Dialing Prefix
PB Phone #
My Phone #
Modem Type
LAN Firewall Settings
Network Settings
Remote PCRefill