Pitney Bowes RISO ComColor Printer - Manual (Page 33)

31
Preparations for Use >> Paper and Originals
1
Adding or Switching Paper in the Standard
Tray
Press the standard tray descent button when loading additional
sheets or when switching paper. Note that the standard tray is
automatically lowered when all paper is removed.
1
Press the standard tray descent button to lower the
standard tray.
Hold the button until the tray reaches the desired position.
2
Load additional paper, or switch the loaded paper.
Closing the Standard Tray
1
Remove the loaded paper.
Make sure the machine is ON.
2
Close the standard tray.
Make sure the standard tray is all the way down
before closing it.
In the High Capacity Feeder
1
Spread the guides.
Set the paper feed guide levers (in two positions on both
sides) to unlock and slide the guides.
The paper guide cannot slide when the standard
tray padding cover is attached, so remove the cover
in either of the following cases.
• Paper size: Smaller than A4 (LTR)/Larger than A3
(LDR)
• Envelope size: C5/DL-R
ComColor Series Basic Guide 02