Pitney Bowes RISO ComColor Printer - Manual (Page 56)

54
[Program]
Specify settings for the number of copies and sets, collating,
slip sheets, and other options for 60 groups. Quickly print
exactly the number of copies of the number of sets you
need. This feature is convenient when printing copies in
various quantities for distribution to several different groups,
such as corporate divisions or classes.
[Add cover]
Insert preprinted sheets or colored paper that has been
loaded in the tray as covers.
[Binding side]
Specify the position of the binding.
[Front cover]
Specify front cover settings.
To add a front cover, select [Yes] and specify the tray where paper for
the cover is loaded.
[Back cover]
Specify back cover settings.
To add a back cover, select [Yes] and specify the tray where paper for
the cover is loaded.
[Collate/slip sheet]
For several copies of multi-page originals, specify whether to
collate the copies into sets. Also, specify whether to insert a
slip sheet between copies. When you have connected an
optional multifunction finisher or face down offset stapler,
you can also select the offset output.
z [Collate]
Specify the type of collation.
[Auto]
[Sort] is automatically specified when originals are scanned with the
ADF. [Group] is specified when originals are scanned on the platen.
[Group]
Copy one page from the original in a specified quantity, then copy
the next page.
[Sort]
Copy complete sets of the original, with pages arranged in order.
z [Slip sheet]
Specify whether to insert a slip sheet between sets of copies.
[OFF]
Do not insert a slip sheet.
[Between sets]*
Insert a slip sheet between sets, based on the unit specified in
[Collate].
[Between jobs]*
Insert a slip sheet between copy jobs.
* When you have selected [Between sets] or [Between jobs], specify
the feed tray for these slip sheets.
z [Number on slip sheet]
Print numbers or letters on a slip sheet. The print position is
at the bottom (5mm above the bottom) of the sheet. For an
unregistered irregular sized sheet, the print position is at the
top (5mm below the top) of the sheet.
[OFF]
You cannot print on a slip sheet.
[1,2,3,...]
Print slip sheets 1, 2, 3... in a first-come, first-served order.
[A,B,C,...]
Print slip sheets A, B, C... Z, AB, AC... in a first-come, first-served order.
(Up to ZZZ)
z [Offset output]
When you have connected an optional multifunction finisher
or face down offset stapler, specify whether to move the
output position after each unit is printed.
[Auto-Rotate]
This option automatically rotates the image of originals 90° if
the size of the loaded original matches the size of paper in
the tray but the orientation does not match. Normally,
specify [ON] for this setting.
[Staple/Punch]
When you have connected an optional multifunction
finisher, staple or punch holes in copies. If you specify [Staple
speed priority] in [Details] to [ON], stapling is conducted
without lowering the printing speed. But both ends of a
staple come out of the front. If the face down offset stapler is
connected, only Staple can be specified.
ComColor Series Basic Guide 02