Pitney Bowes RISO ComColor Printer - Manual (Page 88)

86
6
Press [OK].
Complete other copy settings as needed.
7
Enter the number of copies.
Use the numeric keys for input.
8
Press the [START] key.
When you are using the platen glass, a confirmation message
may be displayed regarding scanning the next original.
Load the next original and press [Scan]. After all originals are
scanned, press [Print].
Copying with Copy and Pause
Before high-volume copying, you can print just one copy
of a job to confirm that the finish and settings are correct.
1
Load the original.
Load the original on the platen glass or in the ADF.
2
Complete the copy settings.
3
On the [Functions] screen, press [Copy and pause].
4
Enter the number of copies.
Use the numeric keys for input.
5
Press the [START] key.
At this point, only one copy is produced. Check how the copy
was made.
ComColor Series Basic Guide 02