Pitney Bowes RISO ComColor Printer - Manual (Page 36)

34
3
Adjust the paper arranger.
Normally, the paper arranger should be extended when
printing on paper that is B4 size or smaller. How paper is
stacked after printing varies depending on stiffness and
other factors. Adjust the arranger as needed.
4
Lift the paper guide (end) to stand it upright.
Fold all paper guides when printing on paper larger
than 320 × 432 mm (12
1 / 2 " × 17").
Closing the Stacking Tray
1
After confirming that there are no printouts in the
stacking tray, press the paper guides open button.
The paper guides (side and end) now move into position for
storage.
2
Lower the paper guide (end) toward the stacking
tray to fold it up.
3
Fold up the paper arranger.
4
Lower the paper guides (side) inward, and then close
the stacking tray.
Setting the Corrugators to the High
Capacity Stacker
Feeding and paper alignment vary depending on the
paper size and type that you use; therefore, adjust the
corrugators so that printouts will be aligned.
• Normally, you do not need to adjust the corrugators
when you print. Adjust the corrugators for better
feeding and printout alignment.
• Paper alignment may not improve according to the
paper size, paper type, environment and storage. For
details, contact your dealer (or authorized service
representative).
ComColor Series Basic Guide 02