Pitney Bowes RISO ComColor Printer - Manual (Page 55)

53
Basic use >> Copy Mode Screens
2
[Stamp Page/Date]
Stamp the page number and date at a specified position.
[OFF], [ON]
To add the page number or date on copies, select [ON]. If not, select
[OFF].
[Transparency]
Select whether to use a transparent background behind the page or
date printed on copies.
[Start number] (Only for page number printing)
Specify the initial number to print as the page number. Enter the
number using [] and [] or the numeric keys.
[Stamp start page] (Only for page number printing)
Specify the first page on which to start printing page numbers. Enter
the number using [] and [] or the numeric keys.
[Stamp position]
Specify where on the page to print the page number or date.
The page number and date cannot be printed together
in the same position.
[Applied page] (Only for date printing)
Select whether to print the date on all pages or only the first page.
[Stamped date] (Only for date printing)
Specify the date to print.
[Image quality]
Specify the scanning resolution when copying originals.
[Gamma control]
Adjust the gamma value of colors, as desired.
[Image control]
Specify advanced image processing settings for scanned
originals.
[Auto]
Image processing is performed automatically.
[Photo/Line level]
Specify image processing optimized for the outline of text or for
reproducing photos clearly.
[Edge enhancement]
Emphasize the edge of portions recognized as text.
[Moire elimination]
Reduce moiré in portions recognized as photos.
[Base color level]
When copying originals that have a colored background,
specify how much the background is reduced in copies.
[Print density]
Adjust the print density to any of the five levels. The smaller
the value, the lower the density. The larger the value, the
higher the density.
ComColor Series Basic Guide 02