Rocktron Intellifex On-Line User Manual
Page 18
15
Pan 1/2
This allows for the panning of each delay to the left or right output, if
desired. The Pan parameter is adjustable from 0 to 100—where 0 is full left,
100 is full right and 50 is center.
Dly Time 1/2
These parameters determine the amount of time after a signal is input that
the delayed signal will begin to reproduce the input signal.
Regen 1/2
This parameter is provided for each delay and determines the number of
times the delayed signal will repeat itself. This is achieved by feeding the
delayed output back into the input. Higher levels of regeneration will result
in more repeats.
D Type
The
Delay Type parameter determines whether the Stereo, Ping-Pong or 2-
Tap delay type is currently active.
Dl Hf Damp
Delay High Frequency Damping determines the amount of high frequency
content in the delayed and regenerated signals. Higher amounts of damping
will result in less high frequency information in the delayed signal.