Rear panel – Rocktron Intellifex On-Line User Manual
Page 8
5
1
RIGHT CHANNEL INPUT jack:
This standard 1/4" mono jack provides input to the right channel of the Intellifex Online.
When using only one input (mono), this jack should be used.
2
LEFT CHANNEL INPUT jack:
This standard 1/4" mono jack provides input to the left channel of the Intellifex Online. When
using only one input, this jack should not be used.
3
RIGHT CHANNEL OUTPUT jack:
This standard 1/4" mono jack provides an output for the right channel of the Intellifex Online.
When using the unit in a mono application, either output jack may be used.
4
LEFT CHANNEL OUTPUT jack:
This standard 1/4" mono jack provides output for the left channel of the Intellifex Online.
When using the unit in a mono application, either output jack may be used.
Note:
When using a mono input (Right Channel INPUT jack)
and a mono output (either the Left or Right Channel
OUTPUT jack), the left and right effected signals will be
summed at the single output.
5
PHANTOM POWER jack:
This jack offers the ability to power the Rocktron MIDI Mate
™
Foot Controller from a seven
pin MIDI cable which connects from the MIDI Mate to the MIDI IN jack on the rear panel of
the Intellifex Online, eliminating the need to find an AC outlet near where the footpedal would
be placed during a performance—or the need to run an extension cord out to the MIDI Mate.
Instead of inserting the adaptor into the MIDI Mate POWER jack, plug it into the
PHANTOM POWER jack on the Intellifex Online. This will power the MIDI Mate through
pins 6 and 7 of the MIDI cable connecting the two units. A 7-pin MIDI cable must be used
and is available through your Rocktron dealer.
6
MIDI IN jack:
This 7-pin DIN connector receives MIDI information from the device which is transmitting
the MIDI commands for the Intellifex Online to execute.
4. Rear Panel