Rocktron Intellifex On-Line - Manual (Page 9)

6
7 MIDI OUT/THRU jack:
This standard 5-pin DIN connector passes on the MIDI information that is received at the
MIDI IN jack to other MlDI-compatible devices via a MIDI cable. It also outputs MIDI data
when performing a memory dump.
Note: Inherently in MIDI there is a limit to the number of devices which can be chained
together (series connected). With more than three devices, a slight distortion of
the MIDI signal can occur (due to signal degradation) which can cause an error
in MIDI signal transmission. Should this problem arise, a MIDI box can be used
which connects directly to the MIDI device which transmits MIDI information and
has multiple connectors for the multiple devices receiving MIDI. MIDI cables
should not exceed 50 feet (15 meters) in length.
8 POWER jack:
This jack accepts power from the 9VAC/1500mA adaptor supplied with the unit. For more
information on the power supply see the Power Requirements section on page 2.