Xblue Networks X-44 - Manual (Page 48)

Enable Call Block: - Click on the Check Box to enable all 10 of the call Blocking Entries.
Caller Blocking Entry x: (x = 0 - 9: - Enter the telephone numbers that you want to block).
Remember to use as much of the telephone number as you can.
Notes:
Call Forward
Description:
There are three different types of call forwarding; Always (Direct), Busy and No Answer. Each call can be
forwarded to an internal extension, voicemail or to an external telephone number such as a cellular
telephone. This allows you to customize how calls to your extension will forwarded.
Operation:
This feature can be programmed using the Telephone User Interface (TUI) or the Graphical User
Interface (GUI) through a standard Internet Browser.
The Telephone User Interface:
1. From an Idle Telephone Press the FWD Button to Program Call Forward.
2. Select “Always, Busy or No Answer Forwarding.
3. Press the Center Navigation Button
4. Select Status - Change to On
5. Press the lower left “Save” button
6. Select Destination Enter voicemail
7. Press the lower left “Save” button
If you are using No Answer - You will have to program the amount of time a call should ring at your
telephone before it is sent to the new destination.
The Graphical User Interface:
After connecting to the telephone using an Internet Browser, locate the “Phone” tab.
1. Check the type of forwarding that you would like to use
2. Enter the destination
3. Scroll to the bottom of the page and select Save
If you are using No Answer - You will have to program the amount of time a call should ring at your
telephone before it is sent to the new destination.
Notes:
Feature Descriptions
48