Xblue Networks X-44 - Manual (Page 76)

Premise Text Message
• Premise Message Type: - There are 4 types of Preprogrammed messages; Idle, the default, Call Me
Later, Call My Mobile, Do Not Disturb, and Other (which allows you to enter your own message).
Once enabled all intercom calls to your extension will receive this message in their display.
• Premises Message: - Enter up to 16 Characters or Numbers such as “Out of office”, “At the Doctor”,
“Off-Site Meeting”.
Subscriber Information
• Phone Number: - Each telephone will automatically be assigned an extension number between 101
and 116. To ensure that each extension is in the right place, you may change the extension number
to any three digit number within the numbering plan. (See - System - Numbering Range Settings -
Range Settings. The default is 101 - 199.)
• Display Name: - Enter the name, up to 12 characters, that will be seen in the display.
• DTMF Type: - Select the DTMF type to be used. In the United States this should be set to RFC2833.
• DTMF Payload - In the United States, using RFC2833, the payload should be set to 101.
Forwarding Settings
There are three different types of call forwarding; Always, Busy and No Answer Forward. Click on the
check box to enable the type of call forwarding that you would like to use. Then enter [vm] for voicemail
or enter the number where the call should be forwarded to, when a call is transferred to your extension.
Always Call Forwarding
This feature forwards all calls, without ringing your telephone or giving you a chance to answer the call.
In addition, there is no indication that a call is “ringing” your extension.
• Always Forward Destination: - Enter the forward destination. This can be another extension,
voicemail, or an external telephone number such as a cellular telephone.
Busy Call Forward:
This feature will forward calls when your phone is busy and overrides the “Call Waiting” feature.
• Busy Forward Destination: - Enter the forward destination. This can be another extension,
voicemail, or an external telephone number such as a cell phone.
No Answer Call Forward:
This feature will only forward calls that go unanswered at your extension. At default, the extension is
forwarded to “vm” Voicemail.
• No Answer Call Forward Destination: - Enter the forward destination. This can be another
extension, voicemail, or an external telephone number such as a cell phone.
No Answer Time (sec):
• This is the amount of time that a call will ring at your extension before it is considered a “No
Answer” call. At the expiration of this timer, the call will be forwarded to the entered destination.
Web Programming
76