Xblue Networks X-44 - Manual (Page 68)

6. Ring Type
3. Trunk Line 2
4. Trunk Line 3
5. Trunk Line 4
6. Operating Settings
7. Numbering Range
On/Off Control
Range Settings (101 - 199)
Reset Phone Number
8. Time Zone
9. DID Settings
Status
On/Off
DID List
1 - 16
10. Reset Settings
5. SIP
1. DTMF
2. Codec
3. Packet Time
6. Block Anonymous
7. Call Blocking
8. Ping IP Address
9. Reset Phonebook
10. Reset to Default
Reset Configuration
Reset Phonebook
Reset All
Ring Type - Select the distinctive ringing tone for each
telephone line.
DID Settings - Direct Inward Dial - This allows users to have
their own “Private” telephone number, which can be
programmed to ring directly at their extension.
Reset Setting - Use this parameter to reset the telephone
lines back to factory default.
SIP - The SIP settings are preset to work in the United
States on a standard data network.
Block Anonymous - If enabled all anonymous calls will be
automatically blocked.
Ping IP Address - This troubleshooting parameter is used to
locate other devices on the network.
Reset Phonebook - Reset your phonebook, deleting all
entries.
Reset to Default - Select one or more parameter to reset
back to factory default.
8. Reboot Reboot allows you to reboot your X-44 telephone without
affecting any of the other telephones on your network.
Programming Menu
68