Xblue Networks X-44 - Manual (Page 67)

7. Admin Settings
1. Phone Number
2. Account Type
1. Admin
2. User
3. Network Settings
1. Network Type
Static
1. Static IP Address
2. Subnet Mask
3. Default Gateway
4. DNS
DHCP
4. System Setting
1. Multi-Service
2. Trunk Line 1 ~ 4
1. SIP Server
1. SIP Proxy
2. Outbound Proxy
3. Registrar Server
4. Registrar Outbound
5. Port
2. Authentication
1. Authorized IP
2. Authorized Password
3. Phone Number
4. Display Name
5. Answering Position
1. Operator
2. Auto Attendant
3. All Ring
4. EXT (Extension)
Phone Number - Each X-44 is assigned a unique number,
which is also their extension number. The default is 101 ~
116, but can be anything from 200 ~ 800. Be careful not to
create any conflicts such as 311, 411, 611, or 911.
Account Type - There are two types of account; Admin,
which has access to all programming parameters and User,
which only has basic access to the parameters.
Network Settings - At default your new telephone is set to
“DHCP” allowing it to automatically connect to your existing
network. However, you can also set it to “Static IP” which
requires you to enter the IP Address, Subnet Mask, Default
Gateway, and the DNS server. If you are not comfortable
with these settings, simply leave it at DHCP.
System Settings - This is where you will set up the
telephone lines, Authentication, Display Name, Answer
Position, etc.
Multi-Service - There are four telephone lines that can be
authenticated. It may be necessary to program each line
individually, or all at one. Programming lines individually is
called “One to One”, and all at once is called “One to Many”.
Trunk Line - The programming entry parameters will be
provided to you and should be entered into the correct
fields. SIP and Outbound Proxy as well as the Registrar
Server and Registrar Outbound, and the port number will be
provided to you in a table that resembles the entry screen.
Authentication - Enter the Authorized IP and Password,
which will be provided to you when you order your new
telephone lines.
Phone Number - Enter the Provided telephone number. If
you are “Porting” your existing telephone number, enter that
number here. Allow 15 to 20 working days to get an
existing telephone number ported over to your new
telephone lines.
Display Name - Enter the provided Display Name.
Depending on your provider this will be what the called
party will see when you call them.
Answering Position - Select where each telephone line
should ring.
The Operator - Only the Operator (Attendant will ring)
Auto Attendant - The Automated Receptionist will answer
incoming calls and allow callers to enter the extension
number of the person that they are trying to reach.
All Ring - Ring some or all authenticated telephones.
Ext (Extension) - Ring a specific Extension.
Programming Menu
67