Pontiac 2005 Grand Prix - Manual (Page 375)

7. The tools you will be using include the jack (A)
extension and protector/guide (B) and the wheel
wrench (C).
Removing the Flat Tire and
Installing the Spare Tire
Removing Bolt-On Wheel Covers with
Nut Caps on Steel Wheels
If the vehicle has steel wheel covers with functional,
plastic nut caps, do the following:
1. Loosen the nut
caps by turning the
wheel wrench in a
counterclockwise
direction. If needed,
finish loosening them
by hand. The nut caps
will not come off.
2. Use the flat end of the wheel wrench to pry along
the edge of the cover until it comes off.
The edge of the wheel cover could be sharp,
so do not try to remove the cover with bare hands.
Do not drop or lay the cover face down, as it
could become scratched or damaged.
5-85