Altera User Flash Memory User Manual
Page 28
Figure 8: Simulation Waveform
Functional Results—Simulate the User Flash Memory in ModelSim-Altera Software
Simulate the design in the ModelSim-Altera software to compare the results of both simulators.
To set up the ModelSim-Altera software , follow these steps:
1. Unzip the alt_ufm_msim.zip file to any working directory on your PC.
2. Start the ModelSim-Altera software.
3. On the File menu, click Change Directory.
4. Select the folder in which you unzipped the files. Click OK.
5. On the Tools menu, click Execute Macro.
6. Select the ufm_ex.do file and click Open. This is a script file for ModelSim-Altera software that automated
all necessary settings for the simulation.
7. Verify the results shown in the Waveform Viewer window.
You can rearrange signals, remove signals, add signals, and change the radix by modifying the script in
ufm_ex.do accordingly.
Altera User Flash Memory (ALTUFM) IP Core User Guide
Altera Corporation
UG-040105
Functional Results—Simulate the User Flash Memory in ModelSim-Altera Software
28
2014.08.18