User leds, Push button switches, The flash tab – Altera Cyclone V E FPGA User Manual
Page 23: User leds –7 push button switches –7, The flash tab –7
Advertising
Chapter 6: Board Test System
6–7
Using the Board Test System
December 2014
Altera Corporation
Cyclone V E FPGA Development Kit
User Guide
User LEDs
The User LEDs control displays the current state of the user LEDs. Click the graphical
representation of the LEDs to turn the board LEDs on and off. You can click ALL to
turn on and off all of the user LEDs at once.
Push Button Switches
The read-only Push Button switches control displays the current state of the board
user push buttons. Press a push button on the board to see the graphical display
change accordingly.
The Flash Tab
The Flash tab allows you to read and write flash memory on your board.
shows the Flash tab.
The following sections describe the controls on the Flash tab.
Figure 6–3. The Flash Tab
Advertising