Altera DSP Development Kit, Cyclone II Edition Getting Started - Manual (Page 13)

Altera Corporation Getting Started User Guide 2–3
August 2006 DSP Development Kit, Cyclone II Edition
Getting Started
Installing the Quartus II Software & MegaCore Functions
Refer to Installing the Quartus II Software in the Quartus II Installation &
Licensing Manual for PCs for software installation instructions. After
installing the software, request and install a license to enable it. Refer to
“Set up Licensing” on page 2–6 for more information.
1
During the installation of the Quartus II software, you are given
the option to install the MegaCore IP Library. When prompted
to do so, choose to install the MegaCore IP Library and follow
the on-screen instructions.
Installing The MathWorks MATLAB/Simulink CD-ROM
To install The MathWorks software, follow these steps:
1. Before installing, make sure that you have your Personal License
Password (PLP) available. To obtain the 30-day evaluation license
and for more information, please visit the MathWorks at:
www.mathworks.com/products/connections/trials/altera.shtml .
2. If it is running, close the MATLAB/Simulink software.
3. Insert MathWorks MATLAB and Simulink CD-ROM Release 2006a
(2006a). The MathWorks Installer automatically starts, displaying
the Welcome to The MathWorks Installer dialog box. Choose
Install
and click Next.
4. Enter your name, company name, and PLP in the License
Information
dialog box and click Next.
5. Review the software licensing agreement. If you agree with the
terms, select the Yes check box and click Next.
6. Select Typical or Custom installation (for any user-specific
selections) and click Next.
7. Click Install.
8. Click Finish.
Installing DSP Builder
To install DSP Builder, refer to the DSP Builder User Guide for installation
instructions.