Altera DSP Development Kit, Cyclone II Edition Getting Started User Manual
Page 23
Advertising
Altera Corporation
Getting Started User Guide
2–13
August 2006
DSP Development Kit, Cyclone II Edition
Getting Started
4.
Under Reserve all unused pins, select As inputs, tri-stated
(
Figure 2–6. Device & Pin Options Dialog Box
5.
Click OK to close the Device & Pin Options dialog box.
6.
Click OK to close the Settings dialog box.
f
For more information on configuring the EP2C70 FPGA, refer to the
Cyclone II DSP Development Board Reference Manual.
For more information about configuring Cyclone II devices, refer to the
Configuring Cyclone II Devices chapter of the Cyclone II Device Handbook.
Advertising