Slp-50 anti-aliasing filter, Connecting the slp-50 anti-aliasing filter – Altera DSP Development Kit, Cyclone II Edition Getting Started User Manual
Page 19
Advertising
Altera Corporation
Getting Started User Guide
2–9
August 2006
DSP Development Kit, Cyclone II Edition
Getting Started
Figure 2–3. Connecting the USB-Blaster Download Cable to J9
SLP-50 Anti-Aliasing Filter
The SLP-50 anti-aliasing filter from Mini-Circuits provides a 55 MHz
cutoff frequency. To use the anti-aliasing filter, connect the filter to one
end of the SMA cable. You can perform an external loopback from the
output of the digital-to-analog (D/A) converter to the input of the
analog-to-digital (A/D) converter using the filter and cable assembly. If
the cutoff frequency must be lower than 55 MHz, other filters may be
used.
JTAG Connector (J9)
USB-Blaster Cable
Advertising