Altera DSP Development Kit, Cyclone II Edition Getting Started - Manual (Page 32)

2–22 Getting Started User Guide Altera Corporation
DSP Development Kit, Cyclone II Edition August 2006
Testing the Board Using the Factory Design
The plotted graph of the peak spur level is below 60 db. A normalized
FFT plot of ADC CHANNEL A output is shown in
Figure 2–12 .
Figure 2–12. Normalized Spectral Plot of 12-bit ADC Channel A Output Data
Conclusion
This Getting Started User Guide walks you through the software
installation process, obtaining the license for the DSP Development Kit,
Cyclone II Edition, and other software, as well as board setup,
configuration, and testing of the Cyclone II DSP development board.