Connecting the sma cable – Altera DSP Development Kit, Cyclone II Edition Getting Started User Manual
Page 20
Advertising
2–10
Getting Started User Guide
Altera Corporation
DSP Development Kit, Cyclone II Edition
August 2006
Connect the Cables to the Board & PC
Connecting the SMA Cable
After attaching the SLP-50 (or other) anti-aliasing filter to one end of the
the SMA cable, connect the SMA cable to the D/A and A/D connectors
on the Cyclone II development board:
■
The SMA D/A output converter DAC CHANNEL A (J31)
■
The SMA A/D input converter ADC CHANNEL A (J32)
shows the cable and the SLP-50 anti-aliasing filter installed as
required in
“Performing the A/D & D/A Converter Performance Test”
Figure 2–4. SMA Cable & SLP-50 Filter Installed to Connect DAC CHANNEL A (J31) with ADC CHANNEL A
(J32)
Advertising