On-board computer and displays, Display messages – Mercedes-Benz 2013 GL Class User Manual

Page 307

Advertising
background image

Display messages

Possible causes/consequences and M Solutions

Blind Spot Assist or Active Blind Spot Assist is temporarily
inoperative. Possible causes are:

R

the sensors are dirty.

R

function is impaired due to heavy rain or snow.

R

the radar sensor system is outside the operating temperature
range.

R

the radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio
stations or other sources of electromagnetic radiation.

The yellow 9 indicator lamps also light up in the exterior
mirrors.
When the causes stated above no longer apply, the display
message disappears.
Blind Spot Assist or Active Blind Spot Assist is operational again.
If the display message does not disappear:

X

Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.

X

Secure the vehicle against rolling away (

Y

page 178).

X

Clean the sensors (

Y

page 369).

X

Restart the engine.

Blind Spot Assist

Inoperative
Active Blind Spot

Assist Inoperative

Blind Spot Assist or Active Blind Spot Assist is defective.
The yellow 9 indicator lamps also light up in the exterior
mirrors.

X

Visit a qualified specialist workshop.

Park Assist

Canceled

The driver's door is open and the driver's seat belt has not been
fastened.

X

Repeat the parking process with the seat belt fastened and the
driver's door closed.

You have inadvertently touched the multifunction steering wheel
while steering intervention was active.

X

While steering intervention is active, make sure that the
multifunction steering wheel is not touched unintentionally.

The vehicle has started to skid and ESP

®

has intervened.

X

Use Active Parking Assist again later (

Y

page 216).

Display messages

305

On-board computer and displays

Z

Advertising