Flat tire, Preparing the vehicle, If there is a flat tire, inspect the tires – Mercedes-Benz 2013 GL Class User Manual

Page 379: Breakdown assistance

Advertising
background image

Vehicles with a "Minispare" emergency

spare wheel

:

Alignment bolt

;

Velcro fastener

=

Folding wheel chock

?

Ratchet wrench

A

Lug wrench

B

Jack

C

Wheel bolts

D

Towing eye

X

Lift the cargo compartment floor up
(

Y

page 337).

Flat tire

Preparing the vehicle

Your vehicle may be equipped with:

R

MOExtended tires (tires with run-flat
properties) (

Y

page 378)

R

a TIREFIT kit (

Y

page 378)

R

an emergency spare wheel (only for certain
countries) (

Y

page 427)

Information on changing/mounting a wheel
(

Y

page 416).

Vehicle preparation is not necessary on
vehicles with MOExtended tires.

X

Stop the vehicle on solid, non-slippery and
level ground, as far away as possible from
traffic.

X

Switch on the hazard warning lamps.

X

Apply the electric parking brake manually.

X

Bring the front wheels into the straight-
ahead position.

X

Move the DIRECT SELECT lever to position
P.

X

Vehicles with the ON&OFFROAD

package: make sure that highway level is

selected (

Y

page 204).

X

Switch off the engine.

X

Vehicles without KEYLESS-GO: remove

the SmartKey from the ignition lock.

X

Vehicles with KEYLESS-GO: open the

driver's door.
The on-board electronics have status

0,

which is the same as the SmartKey having
been removed.

X

Vehicles with KEYLESS-GO: remove the

Start/Stop button from the ignition lock
(

Y

page 159).

X

All occupants must get out of the vehicle.
Make sure that they are not endangered as
they do so.

X

Make sure that no one is near the danger
area while a wheel is being changed.
Anyone who is not directly assisting in the
wheel change should, for example, stand
behind the barrier.

X

Get out of the vehicle. Pay attention to
traffic conditions when doing so.

X

Close the driver's door.

X

Unload heavy luggage.

i

Only operate the tire inflation compressor

using a 12 V socket, even if the ignition is
turned off (

Y

page 342).

An emergency cut-out ensures that the on-
board voltage does not drop too low. If the
on-board voltage is too low, the power to
the sockets is automatically cut. This
ensures that there is sufficient power to
start the engine.

Flat tire

377

Breakdown assistance

Advertising