On-board computer and displays – Mercedes-Benz 2013 GL Class User Manual

Page 321

Advertising
background image

Problem

Possible causes/consequences and M Solutions

!
The yellow ABS warning
lamp is lit while the
engine is running.

ABS is temporarily unavailable. Therefore, BAS, BAS PLUS, ESP

®

,

EBD (electronic brake force distribution), PRE-SAFE

®

,

PRE-SAFE

®

Brake, COLLISION PREVENTION ASSIST, the HOLD

function, hill start assist, crosswind driving assistance and ESP

®

trailer stabilization, for example, are also deactivated.
ATTENTION ASSIST is deactivated.
Possible causes are:

R

Self-diagnosis is not yet complete.

R

The on-board voltage may be insufficient.

G

WARNING

The brake system continues to function normally, but without the
functions listed above. The front and rear wheels could therefore
lock if you brake hard, for example.
The steerability and braking characteristics may be severely
affected. The braking distance in an emergency braking situation
can increase.
If ESP

®

is not operational, ESP

®

is unable to stabilize the vehicle.

There is a risk of an accident.

X

Carefully drive a short distance on a suitable stretch of road,
making slight steering movements at a speed above 12 mph
(20 km/h).
The functions mentioned above are available again when the
warning lamp goes out.

If the warning lamp is still on:

X

Observe the additional display messages in the multifunction
display.

X

Drive on carefully.

X

Visit a qualified specialist workshop.

Warning and indicator lamps in the instrument cluster

319

On-board computer and displays

Z

Advertising