Securing cargo, Stowage and features, Stowage areas – Mercedes-Benz 2013 GL Class User Manual
Page 337
X
Move the head restraints to the lowest
position (
X
Pull release loop : of seat cushion ;.
X
Fold seat cushion ; upwards.
X
Pull release handle = in the direction of
the arrow.
The backrest is released.
X
Fold the backrest forwards until it reaches
the cargo compartment position.
X
Guide seat belts ; under respective
clips :.
Folding the rear bench seat back
X
Fold seat backrest ; back until it engages.
Make sure not to trap the seat belt while
doing so.
X
Swing seat cushion : back.
X
Pull up and adjust the head restraints if
necessary (
Securing cargo
Cargo tie-down rings
General notes
Observe the following notes on securing
loads:
R
secure the load using the cargo tie-down
rings.
R
do not use elastic straps or nets to secure
a load, as these are only intended as an
anti-slip protection for light loads.
R
do not route tie-downs across sharp edges
or corners.
R
pad sharp edges for protection.
Stowage areas
335
Stowage and features
Z