User controls, Display | 3d – Optoma EH503 User Manual
Page 42
English
42
Display | 3D
3D Mode
4
DLP Link: Select DLP Link to use optimized settings for DLP Link 3D
Glasses.
4
VESA 3D: Select VESA 3D to use optimized settings for IR-based 3D
images.
3D2D
Press ◄ or ► to select projector display 3D content in 2D (Left) or 2D(Right)
without using 3D glasses to enjoy 3D content. This setting can also be used
for dual projector passive 3D installations.
3D Format
4
Auto: When a 3D identification signal is detected, the 3D format is
selected automatically. (For HDMI 1.4 3D sources only)
4
SBS: Display 3D signal in Side-by-Side format.
4
Top and Bottom: Display 3D signal in Top and Bottom format.
4
Frame Sequential: Display 3D signal in Frame Sequential format.
3D Sync. Invert
Press ◄ or ► to enable or disable the 3D Sync invert function to invert
images.
User Controls