User controls, Setup | lan settings – Optoma EH503 User Manual
Page 54
Advertising
English
54
Setup | LAN Settings
If the connection is successful, the OSD display will show the following
dialogue box.
4
Network State—to display network information.
4
DHCP:
On: Assign an IP address to the projector from the DHCP server
automatically.
Off: Assign an IP address manually.
4
IP Address—Select an IP address
4
Subnet Mask—Select subnet mask number.
4
Gateway—Select the default gateway of the network connected to the
projector.
4
DNS—Select DNS number.
4
Apply—Press Enter to apply the selection.
4
MAC Address—Read only.
v
Network
sub-menu
can only be
accessed if a
network cable
is connected.
User Controls
Advertising