Optoma EH503 - Manual (Page 68)

English 68
7. Press the Menu button on the projector.
8. Select OSD-> SETUP-> Network Settings-> Lan Settings.
9. After getting into Network Status, input the following:
4 DHCP: Off
4 IP Address: 10.10.10.10
4 Subnet Mask: 255.255.255.0
4 Gateway: 0.0.0.0
4 DNS: 0.0.0.0
10. Press (Enter) / ► to confirm settings.
11. Open a web browser (ex, Microsoft Internet Explorer with Adobe
Flash Player 9.0 or higher).
12. In the Address bar, input the IP address: 10.10.10.10.
13. Press (Enter) / ►.
The projector is setup for remote management. The LAN/RJ45 function
displays as follows.
v For more
information,
please visit
http://www.
crestron.com
User Controls