Optoma W350 - Manual (Page 30)

30
English
User Controls
Main Menu Sub Menu Settings
Projector ID 0~99
Audio Settings Internal Speaker On / Off
Mute On / Off
Volume 0~10
Audio Input Default / AUDIO1 / AUDIO2
Audio Input 2 function Mic / Audio Input2
LAN Settings Network Status Connect/Disconnect(Read-Only)
DHCP On/Off [Default Off]
IP Address Default [192.168.0.100]
Subnet mask Default [255.255.255.0]
Gateway Default [192.168.0.254]
DNS Default [192.168.0.51]
Apply Yes / No
MAC Address Read-Only
Exit
Advanced Logo Default / Neutral
Closed Captioning Off / CC1 / CC2
Exit
Input Source VGA / Video / Video / S-Video / HDMI
Source Lock On / Off
High Altitude On / Off
Information Hide On / Off
Keypad Lock On / Off
Test Pattern None / Grid / White Pattern
#6 IR Function On / Off / Top / Front
Background Color Black / Red / Blue / Green / White
Remote Settings User 1 VGA2/S-Video/LAN/Brightness/Contrast/Sleep Timer
User 2 VGA2/S-Video/LAN/Brightness/Contrast/Sleep Timer
User 3 VGA2/S-Video/LAN/Brightness/Contrast/Sleep Timer
Advanced Direct Power On On / Off
Auto Power Off (min) 0~180
Quick Resume On / Off
0~990
Active / Eco.
Lamp Settings Lamp Hours
Lamp Reminder
On / Off
Brightness Mode Bright / Eco. / Dynamic / Eco+
Lamp Reset Yes / No
Exit
Optional Filter Settings Yes / No
Filter Usage Hours 0~9999
Filter Reminder Off / 300hr / 500hr / 800hr / 1000hr
Filter Reset Yes / No
Exit
Reset Yes / No
OPTIONS
SETUP
Optional Filter Installed
Power Mode (Standby)
Sleep Timer (min)
 Please note that the on-screen display (OSD) menus vary according to the
signal type selected and the projector model you are using.
 (
#1
) “Color” and “Tint” are only supported in Video mode.
 (
#2
) “Signal” is only supported in Analog VGA (RGB) signal.
 (
#3
) For XGA model only.
 (
#4
) For WXGA model only. 16:9 or 16:10 depend on “Screen Type” setting.
 (
#5
) “3D Sync Invert” is only available when 3D is enabled and this mode
3D is for DLP link glass only.
 (
#6
) The function depends on model’s specifications.