Optoma W350 - Manual (Page 39)

39
English
User Controls
3D Mode

Off: Select “Off” to turn 3D settings off for 3D images.

DLP Link: Select “DLP Link” to use optimized settings for DLP
Link 3D images.
3D -> 2D

3D: Display 3D signal.

L (Left): Display the left frame of 3D content.

R (Right): Display the right frame of 3D content.
3D Format

Auto : When a 3D identification signal is detected, the 3D
format is selected automatically.

SBS: Use this mode for “Side-by-side” format 3D content.

Top and Bottom: Use this mode for “Top and Bottom” format 3D
content.

Frame Sequential: Use this mode for “Frame Sequential”
format 3D content.
3D Sync. Invert

Press the “On” to invert left and right frame contents.

Press the “Off” for default frame contents.
 “3D Sync Invert” is
only available when
3D is enabled and
this mode 3D is for
DLP link glass only.
 Compatible 3D
source, 3D content
and active shutter
glasses are required
for 3D viewing.
 See page 64 for
supported 3D
formats.
DISPLAY | 3D