Atlona AT VGA MATRIX - Manual (Page 11)

Atlona Technologies www.atlona.com 11
5.0 Operation Controls For VGA0404-A
“AV” AV synchronal button: To transfer video and audio signal synchronously by the switcher
Example: To transfer both video and audio signal from input channel No.3 to
output channel No.2.
Operation: Press buttons in the following order “3”, “AV”, “2”
“VIDEO” Video button: To transfer only video signals from input channel to output channel
Example: To transfer video signals from input channel No.2 to output channel No.1.
Operation: Press buttons in the following order “2”, “VIDEO”, “1”
“AUDIO” Audio button: To transfer only audio signals from input channel to output channel
Example: To transfer audio signals from input channel No.2 to output channel No.4.
Operation: Press buttons in the following order “2”, “AUDIO”, “4”
“1,2,3,4” I/O Keypads: Keys to select I/O channels.
5.1 Operation Controls For VGA0801
“DEMO” Demo button: Press it to auto-switch all the input channels to output channel.
“CLOSE” Close button: Press it to switch off the output channel.
Example: To switch off the output channel
Operation: Press buttons in the following order “1”, “CLOSE”.
“LOCK” Lock button: Press down for 5 seconds to lock the front controls.
Note: Press it for 5 seconds again to unlock the control panel.
“1,2…8” Input Keypads: Keys to select input channels.