Atlona AT VGA MATRIX - Manual (Page 12)

Atlona Technologies www.atlona.com 12
5.2 Operation Controls For VGA3201,VGA0808-A, VGA1608-A
VGA8X8 V2.0 LCD display: Real time monitor of the operations and status
“1,2…8” Input Keypads: Keys to select input channels.
“AV” AV Synchronal button: To transfer video and audio signal synchronously by the switcher
Example: To transfer both video and audio signals from input channel No.3 to
output channel No.6.
Operation: Press buttons in the following order “3”, “AV”, “6”, “END”, “ENTER”
“VIDEO” Video button: To transfer only video signals from input channel to output channel
Example: To transfer video signals from input channel No.3 to output channel No.10.
Operation: Press buttons in the following order “3”, “VIDEO”, “1”, “0”, “END”,“ENTER”
“AUDIO” Audio button: To transfer only audio signals from input channel to output channel
Example: To transfer audio signals from input channel No.12 to output channel No.6.
Operation: Press buttons in the following order “1”, “2”, “AUDIO”, “6”, “END”,“ENTER”
“ / ” Break button: To break different channels in a command
Example: To transfer video and audio signals from input channel No.1 to output
channel No.2,13,6 at the same time
Operation: Press buttons in the following order “1”, “AV”, “2”, “/”, “1”,“3”, “/”, “6”, “END”,
“ENTER”
“END” Ending command button: To finish inputting a command.
“ENTER” Execute button: To perform a command after inputting it.
“ALL” All button: To transfer an input channel to all output channels or switch off all the output
VGA Matrix Switcher System channels
Example1: To transfer video and audio signals from input channel No.7 to all output channels
Operation: Press buttons in the following order “7”, “ALL”