CIRCUTOR QNA500 series - Manual (Page 49)

POWER QUALITY ANALYZER QNA500 8IO
QNA500 8IO Instruction manual 49 / 111
Setup System
This function displays the following options:
• Communications: shows the configuration of the 3 ports of the M-BASE module. The following
information is displayed for each port:
• Speed
• Parity
• Stop bits
• Number of bits
The following information of the ETHERNET port is displayed:
• Name of the module
• DHCP enabled/disabled
• IP Address
• Net mask
• Gateway
• IGMP IP (Internet Group Management Protocol) is a multicast IP. All MULTIFIT
modules must have the same IGMP. This is required for each module to recognise
other modules. In addition, this allows the creation of multicast groups.
• Device number
WARNING: All modules will be automatically reset when any parameter of the
ETHERNET port configuration is changed.
In addition, this window has 2 buttons to refresh the information displayed.